IN3037ST: Letter of Volatility (Ethernet Debugger)
Introduction
This letter describes volatile, non-volatile, and storage media on the specified product. Customers can use this document to comply with security requirements and equipment handling procedures.
For additional information, please contact Intona.
Product Information
Product Family
Intona Ethernet Debugger
Product Model
7060-A
Manufacturer
Intona Technology GmbH
Auweg 32
89250 Senden
Germany
Volatile Memory
The product contains volatile memory, which is erased when power is removed.
| No. | Type | Size | User Modifiable | Function | Process for Cleaning |
|---|---|---|---|---|---|
| 1 | FPGA | 1,658,880 Bits | No | FIFO buffer Ethernet-to-MCU | Power cycle |
2 | MCU internal RAM | 4,390,912 Bits | No | FIFO buffer MCU-to-USB | Power cycle |
Non-Volatile Memory
The product contains non-volatile memory, which is retained when power is removed.
| No. | Type | Size | User Modifiable | Process for Cleaning |
|---|---|---|---|---|
| 1 | NOR Flash | 64 MBits | Yes (firmware update tool via USB). User settings are not stored | None |
| 2 | EEPROM | 16 KBits | Yes (by host tool). Stores user settings. | "reset_device_settings" command in host tool |
The EEPROM is not accessed by firmware 1.00.
Media
The product does not contain media storage devices such as: CD/DVDs, floppy drive, tape drives, or memory cards.
Summary
The product can be sanitized by running the "reset_device_settings" command and powering down.
Document version: 14 / Aug 27, 2021 16:28
Download this document as PDF