SEEBURG HDLM 8 Firmware Archive

This was the stable production release version for both MkI (2 analog + 1 digital inputs) and MkII (4 analog + 2 digital inputs) hardware until 2014-06-05.

Changes (2.0)

• Same code base for iOS, Android and HDLM 8-based hardware (see GoHDLM on iTunes App Store or Google Play App Store)
• USB-Sticks with no standard compliant partition table are now supported
• Support for WLAN Access Point via USB added. The WLAN SSID is the HDLM's device name. The WLAN is transparently bridged to the wired LAN. The HDLM acts like a Ethernet Switch. Wireless speed is limited by the USB port (about 720kpbs). Only Seeburg-certified WLAN devices are supported
• New IP configuration methods: AUTO, DHCP-SERVER, DHCP-CLIENT, STATIC. In AUTO mode, the HDLM starts its DHCP server only if there is no other available, otherwise it will be a client
• New Name Service: if enabled, the HDLM can be accessed in the internet browser via its device name
• Channel Status LEDs now shows "M" for mute and "D" for enabled delay to get a better insight to the channels
• Key lock feature improved. It is now easier to unlock
• Lists now have scrollbars
• Bug in Graphic EQ fixed where the GAIN spinner was not updated while changing FREQ
• Minor bugfixes
• Attention: Safari is now the recommended web browser. In fact, there are several real-time stability problems with current Firefox browsers

Changes (2.0.1)

• fixed a bug with very long lists
• DHCP-Servers are now recognized more reliably in AUTO config mode

Changes

• Same code base for iOS, Android and HDLM 8-based hardware (see GoHDLM on iTunes App Store or Google Play App Store)
• USB-Sticks with no standard compliant partition table are now supported
• Support for WLAN Access Point via USB added. The WLAN SSID is the HDLM's device name. The WLAN is transparently bridged to the wired LAN. The HDLM acts like a Ethernet Switch. Wireless speed is limited by the USB port (about 720kpbs). Only Seeburg-certified WLAN devices are supported
• New IP configuration methods: AUTO, DHCP-SERVER, DHCP-CLIENT, STATIC. In AUTO mode, the HDLM starts its DHCP server only if there is no other available, otherwise it will be a client
• New Name Service: if enabled, the HDLM can be accessed in the internet browser via its device name
• Channel Status LEDs now shows "M" for mute and "D" for enabled delay to get a better insight to the channels
• Key lock feature improved. It is now easier to unlock
• Lists now have scrollbars
• Bug in Graphic EQ fixed where the GAIN spinner was not updated while changing FREQ
• Minor bugfixes
• Attention: Safari is now the recommended web browser. In fact, there are several real-time stability problems with current Firefox browsers

Changes

• Loudspeakers can now be created and edited in the Basic Version.
• There is a new option in the Device Settings, which gives the possibility to save the Output Mute states (see manual).
• Fixed a subtle bug, where sometimes the display of the frequency curves preview was not updated correctly on project load.
• Fixed a very subtle bug, where in seldom circumstances the display or the web interface was not updated correctly at all after loading a project.

Changes

• Fixed bug in property "Delay" of Web Application

Änderungen

• Die Remote-Software wurde an Firefox > >= 3.5 angepasst.
• Achtung bei Update von 1.0.3 oder kleiner: Das Projekt muss nach dem Update neu geladen werden.
  Der Gerätename und die IP-Adresse müssen nach dem Update neu eingestellt werden. Vorher bitte notieren!

Änderungen

• Projekte lassen sich nun als schreibgeschützt mit optionalem vierstelligem Code abspeichen. Entsprechende Einstellungen erreicht man über den neuen Eintrag "SECURITY..." im Projektmenü. Geschützte Projekte werden in den Listen mit einem Vorhängeschloss-Symbol angezeigt.
• Das Output Delay wird nun in der Infoleiste unten im Display auch in Millisekunden angezeigt. (Das ist der aus Entfernung und Temperatur berechnete Wert)
• dB- und Q-Werte werden mit dem Eingaberad nun in vollen 1er-Schritten verändert. Mit gedückter Enter-Taster lassen sich 0.1er-Schritte eingeben.
• Loudspeaker werden nun in Gross-/Kleinbuchstaben im Display angezeigt, um die Produktnamen besser differenzieren zu können.
• Neues Schlüsselwort REVERSE_ORDER in der Loudspeaker Configuration Language: Die Ausgänge von Mehrwegsystemen werden dann von tief nach hoch in die Output Map eingetragen. Für Systeme von Fremdherstellern hilfreich.
• Neues Schlüsselwort VERSION in der Loudspeaker Configuration Language: Beim Importieren von Projekten mit bereits vorhandenen Loudspeakern werden nur diejenigen mit höherer VERSION überschrieben.
• Kleiner Fehler in Texteingabezeilen behoben. Wenn das Feld voll war, konnte der Cursor nicht mehr bewegt werden.
• Anmerkung: Das Update hat keine Auswirkungen auf Ihre Projekte und Loudspeaker.

Changes

• Projects now can be saved write-protected with an optional 4-digit code. This can be done with the new entry "SECURITY..." in the Project Menu. Write-protected projects are listed with a padlock icon.
• The output delay now is indicated in milliseconds as well.
• dB and Q-values are now changed in full 1-steps with the jogwheel. This can be changed to 0.1-steps by holding down the Enter button.
• Loudspeaker names are now shown on the display in big and small letters for better distinction.
• New key word "REVERSE_ORDER" added to the loudspeaker configuration language: The outputs of multiple-way speaker systems then will be assigned from low to high in the Output Map. This is helpful for the configuration of other manufacturers systems.
• New key word "VERSION" added to the loudspeaker configuration language: When importing projects with already existing loudspeakers, only the ones with the higher version will be overwritten.
• A bug in the text input line fixed: The cursor couldn't be moved anymore when the field was full.
• Note: This update does not affect any Projects or Loudspeakers.